China - After purchasing the Chain Saw Machine from ZMAX MACHINERY CO., LTD , most of customers do not know how to properly debugging and testing the new machine. To help customers clear this puzzle, today, the mechanical engineer from ZMAX MACHINERY, the best China saw machine manufacturer will provide with them one completely tutorial about this.

Before the officially machine testing and debugging, people need to firstly fill with the hydraulic oil. The sliding and rotating parts also need to be added a layer of lubricated oil. One point which operator need to special note that the quality of the lubricated oil must be excellent. Otherwise, it will affect the normal operation of Wood Saw Machine .

Second, please install the sawing band to the saw machine and then adjust the tension of the sawing band so that the saw band tension could reach the appropriate level. At the same time, people also need to adjust the limit switch and let it in the condition of turning on. On the other hand, people should also fill the cooling water tank of th9is sawing machine.

After all preparing progress before, the thirdly step should be the machine testing. Please first connect the power and ensure the reliable of the ground line. Then, people could turn on the power switch and start the saw machine for testing. In the testing process, people should listen to its sound and confirm whether it is normal or not. During operation, please let the saw bow down automatically until the saw band drop 0.5 to 1mm below the operating. When it reaches to the limit position, people should check whether the machine will automatic shutdown or not. This experiment should be restarted for three times.

Fifth, after the testing for Wood Saw Machine , people should check the cylinder device. Furthermore, they should also check whether the lifting and falling of the saw bow is reliable and flexible.

Sixth, operator should check the clamp and loosen device of the cylinder device. Please make sure whether this device is flexible and reliable.

After former step, please adjust the speed control knob. People should adjust this part to low speed operation and then high speed operation. This experiment need to be repeated for three times.

When all steps above are over, please clamp one piece of wooden material to do the sawing test. If all operation is normal, we could say that the quality of the machine should be very excellent. To know more information about Chain Saw Machine, Multi Rip Saw Machine or other products, please visit website


ZMAX MACHINERY CO., LTD located in the international woodworking machinery city of Lunjiao Town, Shude District, Foshan City, Guangdong Province. It is a professional enterprise of woodworking machines and tools. Combining with R&D, manufacture and Sales.?The mainly products should be wood and panel processing, Including log cut-off saw machine, round multi-rip saw, plank multi-rip saw machine and clear margin saw machine.

Tel: 86-757-2733-7134
Fax: 86-757-277-37871
Contact Person: Vivian
Phone: 86-186-8002-1021
Msn: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype: ruimamachinerycompany
AIM: chinaruima
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Contact Information
Author: sulemanEmail: This email address is being protected from spambots. You need JavaScript enabled to view it.